Designing the Garden Lamp Installation
arnasati March 13th, 2010
Garden lamps may not be important thing. But from its function, the light can create interesting atmosphere in your garden.
Designing a garden lighting requires fidelty and imagination. Special expertise is not needed, unless you want to arrange garden lights with high difficulty level.
It is classified as difficult, if the number of light points was more than three, or if the garden area was very large and need many lighting angles.
For a small garden, garden lighting can be done by yourself. The most important of the arrangement of light in a small park is the choice of lighting, security, cabling installation, and determine the point you want to lit.
Use low voltage lamp
For outdoor purposes such as garden, use lights and house lights with water resistant specifications. The types of lamp can be incandescent or phosphorescence lamp. Lamp and house lamp are usually made with particular specification, so resistant to splashes of water and therefore not easily shorted.
There are Garden lighting devices with low voltage (12 volts) and high voltage (220volt). The best choice depends on the needs. For security reasons, you should select the garden lighting device with low voltage, especially if the lights will be placed in the water. This prevents a fatal accident if there is current leakage. Low voltage have small potential to harm the body and cause a fire.
Cable matter is also important. Use the appropriate cable. Choice of cable types is important because it related to the supply voltage electrical energy. The longer the cable, the greater the chance of drop voltage. For small garden with little number of light points, you can use fibers or wire cable with size 1 mm2. Large Garden requires a longer cable, it is better to use a 1.5 mm2 cable wire. Hope this information can helps.
Can you believe it if the park was able to generate inspiration? Try practicing these things, you are guaranteed a fresh mind and creative.
